Connect i93 motherboard to PC:Step-by-Step Guide

Connect i93 motherboard to PC: Step-by-Step Guide**

（图片来源网络，侵删）

Introduction:

When you're working with modern computers, it's essential to have the right components and software to ensure everything runs smoothly. One such component that can make your computer run faster and more efficiently is an i93 motherboard. This motherboard is commonly used in high-end computers like昂达平板电脑（昂达笔记本电脑），Connecting the i93 motherboard to your computer is a crucial step in making your computer fully functional. In this guide, we'll walk you through the process of connecting the i93 motherboard and performing a刷ing operation on an昂达平板电脑。

Step 1: Prepare Your Computer

Before you start, make sure your computer is set up properly. Ensure you have a power supply (PSU) that can handle the i93 motherboard. The PSU should output a voltage between 12V and 24V and a current between 5mA and 1mA. Also, ensure your operating system (Windows 1, macOS, or Linux) is up to date.

（图片来源网络，侵删）

Step 2: Connect the i93 Motherboard

The i93 motherboard has two types of connections: the Power Bus (P-Bus) and the Powerental (P-ental). You'll need to connect the motherboard to your computer using one of these connections.

Step 2.1: Choose the Right Connection

P-Bus Connection: This is the default connection for most i93 motherboards. It requires a power supply that outputs 12V or 24V. Connect the P-Bus to your PC's power supply.
P-ental Connection: This connection is used in some older i93 motherboards. Connect the P-ental to your PC's power supply.

Step 2.2: Insert the Motherboard

Place the i93 motherboard into the power supply. Make sure the P-Bus or P-ental is securely seated.

Step 3: Connect the Motherboard to the PC

Once the motherboard is connected to the power supply, you need to connect it to your PC. Follow these steps:

Step 3.1: Insert the Power Bus (P-Bus)

Insert the i93 P-Bus into the PC's power bus. Ensure the P-Bus is securely seated and not damaged.
Securely tighten the screw holding the P-Bus in place.

Step 3.2: Insert the Motherboard

Insert the i93 motherboard into the P-Bus or P-ental. Make sure the motherboard is seated properly and does not touch the P-Bus.

Step 3.3: Secure the Connection

Gently secure the P-Bus or P-ental using a screw or bolt. Make sure the connection is secure and not loose.

Step 4: Perform a Refresh operation on the computer

Once the i93 motherboard is connected to your PC, you'll need to perform a Refresh operation. This operation will refresh the PC's operating system, allowing it to start running the latest software.

Step 4.1: Turn On the PC

Turn on your computer using the power supply.

Step 4.2: Turn Off the i93 Motherboard

Turn off the i93 motherboard using the power supply.

Step 4.3: Restart the PC

Press the power button to turn the PC on. If the PC doesn't start, restart your computer using the power button.

Step 4.4: Select Refresh Operation

Press the power button and select "Refresh" from the menu bar.

Step 5: Perform a Refresh operation on the motherboard

Now that the PC is running, you'll need to perform a Refresh operation on the i93 motherboard to refresh it with the latest firmware.

Step 5.1: Turn On the Motherboard

Ensure the i93 motherboard is turned on.